Komptech Crambo shredder

KOMPTECH CRAMBO MODELS

KOMPTECH CRAMBO: A VERSATILE WOOD WASTE SHREDDER

The Crambo is a dynamic wood waste shredder that can handle most any waste and material thrown at it. The Komptech Crambo enables easy adjustment of the output particle size, by simply exchanging the screen baskets. Whether it´s stumps, green waste, food waste, C&D, or asphalt shingles, the dual shafts provide an aggressive feed while minimizing fines. 

 

A modern operating console and convenient access to all maintenance points makes everyday work very easy.

INSIDE THE MACHINE

Highlights:

  • High throughput on a wide range of materials
  • Aggressive feed with long, counter-rotating shredding drums
  • Variable particle sizes through simple screen basket change
  • Resistant to contaminants
  • Minimal noise and dust emissions
  • Low operating costs

 

SHREDS THIS... AND SO MUCH MORE...

SHREDS ANYTHING

 

  • Aggressive feed for bulky materials
  • Shred large stumps and whole trees without pre-processing
  • Create less fines and reduce wear costs
  • Dirt and rock no problem
  • Highly resistant to metal contamination
  • Unwanted plastics stay big for easier removal
  • Mixes and blends while shredding
  • Shred mixed debris for better volume reduction
  • Consistent sized fuel ready product in one pass
  • Processes the most difficult materials
  • Lowest cost per ton in one pass
  • High throughput with high torque and low RPM’s
  • Less wear when processing leaves, grass, palm and other fibrous material
  • No flying debris

 

CRAMBO SERIES technical specifications

CRAMBO 3400

ENGINE

Diesel engine

CAT ® C9

Power (kW / HP):

242 / 330

Power electrical motor (kW):

1 x 185

SHREDDING UNIT

Drum drive:

hydraulic

Drum rpm:

max 38

Drum length:

9‘ 3“ / 2820 mm

Drum diameter:

2‘ / 610 mm

LOADING HEIGHTS

Loading heights:

Hook: 8‘ 1“ / 2596 mm

Discharge heights (10°-35°):

Hook: 4‘ 6“ - 12‘ / 1390 - 3710 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 9‘ 6“ / 7289 x 2492 x 2905 mm | 38‘ 11“ x 11‘ 0 x 12‘ 6“ / 12361 x 3327 x 3710 mm

L x W x H Trailer:

26‘ 8“ x 8‘ 2“ x 11‘ 6“ / 9120 x 2550 x 3506 mm | 40‘ 9“ x 11‘ 0“ x 14‘ 0“ / 13553 x 3327 x 4250 mm

L x W x H Track:

21‘ 4“ x 9‘ 4“ x 11‘ 2“ / 6940 x 2855 x 3407 mm | 35‘ 9“ x 11‘ 0“ x 13‘ 7“ / 11370 x 3327 x 4150 mm

WEIGHT (dependent on equipment)

Hook:

~ 21.0 t.sh | ~ 21.7 t 

Trailer:

~ 23.5 t.sh | ~ 24.0 t

Track:

~ 27.0 t.sh | ~ 25.1 t

THROUGHPUT (dependent on material)

Performance:

up to 50 t.sh/h
up to 45 t/h

OPTIONS

Engines emission level Tier 3a and 4f/EU stage III and IV, drum armored, hook-shaped teeth, planing teeth, bio cutting unit, screen baskets 80/100/125/150/180/250/300, radio remote control, central lubrication, transferring magnet with swinging arm, magnetic pully etc.

CRAMBO 5000

ENGINE

Diesel engine

CAT ® C13

Power (kW / HP):

328 / 446

Power electrical motor (kW):

1 x 230

SHREDDING UNIT

Drum drive:

hydraulic

Drum rpm:

max 36

Drum length:

9‘ 3“ / 2820 mm

Drum diameter:

2‘ / 610 mm

LOADING HEIGHTS

Loading heights:

Trailer: 9‘ 7“ / 3005 mm

Discharge heights (10°-35°):

Trailer: 6‘ 2“ - 13‘ 6“ / 1920 - 4250 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 9‘ 6“ / 7289 x 2492 x 2905 mm | 38‘ 11“ x 11‘ 0 x 12‘ 6“ / 12361 x 3327 x 3710 mm

L x W x H Trailer:

26‘ 8“ x 8‘ 2“ x 11‘ 6“ / 9120 x 2550 x 3506 mm | 40‘ 9“ x 11‘ 0“ x 14‘ 0“ / 13553 x 3327 x 4250 mm

L x W x H Track:

21‘ 4“ x 9‘ 4“ x 11‘ 2“ / 6940 x 2855 x 3407 mm | 35‘ 9“ x 11‘ 0“ x 13‘ 7“ / 11370 x 3327 x 4150 mm

WEIGHT (dependent on equipment)

Hook:

~ 22.5 t.sh | ~ 22.0 t 

Trailer:

~ 25.0 t.sh | ~ 24.2 t

Track:

~ 28.0 t.sh | ~ 25.3 t

THROUGHPUT (dependent on material)

Performance:

up to 80 t.sh/h
up to 71 t/h

OPTIONS

Engines emission level Tier 3a and 4f/EU stage III and IV, drum armored, hook-shaped teeth, planing teeth, bio cutting unit, screen baskets 80/100/125/150/180/250/300, radio remote control, central lubrication, transferring magnet with swinging arm, magnetic pully etc.

CRAMBO 6000

ENGINE

Diesel engine

CAT ® C18

Power (kW / HP):

429 / 583

Power electrical motor (kW):

1 x 315

SHREDDING UNIT

Drum drive:

hydraulic

Drum rpm:

max 41

Drum length:

9‘ 3“ / 2820 mm

Drum diameter:

2‘ / 610 mm

LOADING HEIGHTS

Loading heights:

Track: 9‘ 6“ / 2906 mm

Discharge heights (10°-35°):

Track: 5‘ 11“ - 13‘ 6“ / 1830 - 4150 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 9‘ 6“ / 7289 x 2492 x 2905 mm | 38‘ 11“ x 11‘ 0 x 12‘ 6“ / 12361 x 3327 x 3710 mm

L x W x H Trailer:

26‘ 8“ x 8‘ 2“ x 11‘ 6“ / 9120 x 2550 x 3506 mm | 40‘ 9“ x 11‘ 0“ x 14‘ 0“ / 13553 x 3327 x 4250 mm

L x W x H Track:

21‘ 4“ x 9‘ 4“ x 11‘ 2“ / 6940 x 2855 x 3407 mm | 35‘ 9“ x 11‘ 0“ x 13‘ 7“ / 11370 x 3327 x 4150 mm

WEIGHT (dependent on equipment)

Hook:

~ 23.5 t.sh | ~ 22.4 t 

Trailer:

~ 26.0 t.sh | ~ 24.6 t

Track:

~ 29.0 t.sh | ~ 25.7 t

THROUGHPUT (dependent on material)

Performance:

up to 110 t.sh/h
up to 100 t/h

OPTIONS

Engines emission level Tier 3a and 4f/EU stage III and IV, drum armored, hook-shaped teeth, planing teeth, bio cutting unit, screen baskets 80/100/125/150/180/250/300, radio remote control, central lubrication, transferring magnet with swinging arm, magnetic pully etc.