KOMPTECH TERMINATOR MODELS

TERMINATOR UNIVERSAL

Waste treatment for material recycling or energy recovery generally begins with a shredding process, in which the entire input material is prepared for subsequent process stages. The Terminator was built specifically for this purpose. As a low-speed single-shaft shredder, it can be used for all types of waste. Drum/opposing comb versions can handle applications from coarse pre-shredding to defined shredding. The continuous cutting gap adjustment allows tailoring of the particle size to subsequent process. A hydraulic drive with load-dependent speed control ensures maximum use of engine output on mobile machines. An electro-mechanical drive for the highest efficiency is offered on stationary variants as an additional option.

INSIDE THE MACHINE

The Komptech brand is synonymous with quality, reliability and stable product value. We use only the best components, from the engine to the output conveyor.

 

The mobile Terminator is powered by a modern Caterpillar® engine. Complete muffling of the engine compartment reduces noise emissions to a minimum. The hydraulic drive with load-dependent speed regulation (constant power control) provides the highest shredding power and prevents jamming and blockages – clearing by reversing is possible at all times. Overload protection prevents unshreddable contaminants from ruining the teeth. The clearly laid out function keys make operation simple and reliable. Control electronics continually monitor the operational status of the machine and intervene to prevent damage should a stoppage occur.

 

Highlights:

  • Shreds even the most difficult materials
  • Sturdy, contaminant-insensitive pre-shredder
  • Choice of shredding units to fit the job
  • Mobile machines with many options
  • Stationary machines with hydraulic or direct drive

 

SHREDS THIS... AND SO MUCH MORE...

SHREDS ANYTHING

 

  • Extremely large feed area measuring 6' 7" / 2000 mm in width and 9' 10" / 3000 mm in length
  • Three shredding units to perfect configuration to the job at hand:
    • U for Universal
    • F for Fine
    • XF for eXtra Fine
  • Variable particle size by adjusting cutting gap
  • Teeth can be re-used multiple times for low wear costs. Armouring available as option

 

Even the toughest waste has no chance against the Terminator, but gets shredded down to the desired particle size. The choice of drum and shredding gap determines whether waste is coarsely pre-shredded or finely shredded to a defined granulation. The spirally arranged teeth (except on the UF unit) keep the material moving and make sure shredding is even, since multiple teeth attack the longer pieces one after the other. The hydraulically adjustable shredding gap between the counter-comb and the drum gives precise control of the output particle size for the next process step. The counter-comb can be folded away entirely to make the shredding area freely accessible for maintenance. The solid teeth are held securely by bolt-on or plug-in tooth holders, and can be re-used several times. Optional tooth armouring increases longevity, and easily replaceable wear rings protect the drum body – all features that keep wear and maintenance costs low.

 

 

U (Universal) - for coarse pre-shredding

- High contaminant-resistance

- Drum teeth can be used three times

- Aggressive material feed

- For bulky waste, white goods, waste wood, railway ties, construction and demolition waste, etc.

 

F (Fine) - a wide range of applications

- Taller teeth for aggressive material feed

- Fixed axial cutting gap produces a defined cut

- Drum teeth can be used twice

- For MSW, bulky waste, commercial waste, waste wood, etc.

 

XF (eXtraFine) - the highest degree of shredding

- Especially for prepping refuse derived fuel (RDF)

- Extremely secure tooth attachment

- the tooth holder is inside the drum

- Weld-on tips for repeat use of drum teeth

- For commercial waste, bulky waste, waste wood

TERMINATOR SERIES technical specifications

TERMINATOR 3400 S

ENGINE

Diesel engine:

CAT ® C9

Power:

242 kW / 330 HP  Drum drive on both sides

Power electrical-hydraulic:

1 x 160 kW / 215 HP

Power electrical-mechanical:

2 x 75 kW / 100 HP

SHREDDING UNIT

Drum rpm:

max 29

Drum length:

9‘ 10“ / 3000 mm

Drum diameter:

41“ / 1050 mm

LOADING HEIGHTS (Mobile Machines)

Loading heights:

Hook: 8‘ 1“ / 2465 mm        Trailer: 9‘ 7“ / 2930 mm        Track: 10‘ 2“ / 3105 mm

Discharge heights (10°-35°):

Hook: 4‘ 6“ - 12‘ 0“ | 1365 - 3665 mm       Trailer: 6‘ 2“ - 13‘ 6“ | 1890 - 4125 mm       Track: 5‘ 7“ - 13‘ 8“ | 1690 - 4175 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 8‘ 8“ / 38‘ 11“ x 11‘ 0“ x 12‘ 6“ | 6840 x 2470 x 2650 / 11870 x 3350 x 3820 mm

L x W x H Trailer:

26‘ 3“ x 8‘ 2“ x 10‘ 8“ / 40‘ 9“ x 11‘ 0“ x 14‘ 1“ | 7990 x 2500 x 3255 / 12430 x 3350 x 4290 mm

L x W x H Track:

21‘ 8“ x 9‘ 4“ x 11‘ 6“ / 36‘ 11“ x 12‘ 7“ x 14‘ 1“ | 6600 x 2855 x 3495 / 11255 x 3830 x 4290 mm

WEIGHT (dependent on equipment)

Hook:

~ 22.0 t.sh / ~ 19.8 t

Trailer:

~ 24.0 t.sh / ~ 22.0 t

Track:

~ 28.0 t.sh / ~ 25.2 t

THROUGHPUT (dependent on material)

Performance:

up to 55 t.sh/h

up to 50 t/h

OPTIONS

Armoured drum teeth, forward movement device (Hook, Trailer), towing unit (Hook), remote control, central lubrication, over-band magnet with swinging arm, magnetic head pulley etc.

TERMINATOR 5000 S

ENGINE

Diesel engine:

CAT ® C13

Power:

28 kW / 446 HP  Drum drive on both sides

Power electrical-hydraulic:

1 x 200 kW / 268 HP

Power electrical-mechanical:

2 x 110 kW / 148 HP

SHREDDING UNIT

Drum rpm:

max 32

Drum length:

9‘ 10“ / 3000 mm

Drum diameter:

41“ / 1050 mm

LOADING HEIGHTS (Mobile Machines)

Loading heights:

Hook: 8‘ 1“ / 2465 mm        Trailer: 9‘ 7“ / 2930 mm        Track: 10‘ 2“ / 3105 mm

Discharge heights (10°-35°):

Hook: 4‘ 6“ - 12‘ 0“ | 1365 - 3665 mm       Trailer: 6‘ 2“ - 13‘ 6“ | 1890 - 4125 mm       Track: 5‘ 7“ - 13‘ 8“ | 1690 - 4175 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 8‘ 8“ / 38‘ 11“ x 11‘ 0“ x 12‘ 6“ | 6840 x 2470 x 2650 / 11870 x 3350 x 3820 mm

L x W x H Trailer:

26‘ 3“ x 8‘ 2“ x 10‘ 8“ / 40‘ 9“ x 11‘ 0“ x 14‘ 1“ | 7990 x 2500 x 3255 / 12430 x 3350 x 4290 mm

L x W x H Track:

21‘ 8“ x 9‘ 4“ x 11‘ 6“ / 36‘ 11“ x 12‘ 7“ x 14‘ 1“ | 6600 x 2855 x 3495 / 11255 x 3830 x 4290 mm

WEIGHT (dependent on equipment)

Hook:

~ 22.5 t.sh / ~ 20.4 t

Trailer:

~ 25.0 t.sh / ~ 22.6 t

Track:

~ 28.5 t.sh / ~ 25.8 t

THROUGHPUT (dependent on material)

Performance:

up to 90 t.sh/h

up to 80 t/h

OPTIONS

Armoured drum teeth, forward movement device (Hook, Trailer), towing unit (Hook), remote control, central lubrication, over-band magnet with swinging arm, magnetic head pulley etc.

TERMINATOR 6000 S

ENGINE

Diesel engine:

CAT ® C18

Power:

429 kW / 583 HP  Drum drive on both sides

Power electrical-hydraulic:

1 x 200 kW / 268 HP

Power electrical-mechanical:

2 x 110 kW / 148 HP

SHREDDING UNIT

Drum rpm:

max 38

Drum length:

9‘ 10“ / 3000 mm

Drum diameter:

41“ / 1050 mm

LOADING HEIGHTS (Mobile Machines)

Loading heights:

Hook: 8‘ 1“ / 2465 mm        Trailer: 9‘ 7“ / 2930 mm        Track: 10‘ 2“ / 3105 mm

Discharge heights (10°-35°):

Hook: 4‘ 6“ - 12‘ 0“ | 1365 - 3665 mm       Trailer: 6‘ 2“ - 13‘ 6“ | 1890 - 4125 mm       Track: 5‘ 7“ - 13‘ 8“ | 1690 - 4175 mm

Dimensions transport position/working position (Conveyor belt 35°)

L x W x H Hook:

22‘ 5“ x 8‘ 1“ x 8‘ 8“ / 38‘ 11“ x 11‘ 0“ x 12‘ 6“ | 6840 x 2470 x 2650 / 11870 x 3350 x 3820 mm

L x W x H Trailer:

26‘ 3“ x 8‘ 2“ x 10‘ 8“ / 40‘ 9“ x 11‘ 0“ x 14‘ 1“ | 7990 x 2500 x 3255 / 12430 x 3350 x 4290 mm

L x W x H Track:

21‘ 8“ x 9‘ 4“ x 11‘ 6“ / 36‘ 11“ x 12‘ 7“ x 14‘ 1“ | 6600 x 2855 x 3495 / 11255 x 3830 x 4290 mm

WEIGHT (dependent on equipment)

Hook:

~ 23.5 t.sh / ~ 21.3 t

Trailer:

~ 26.0 t.sh / ~ 23.5 t

Track:

~ 29.5 t.sh / ~ 26.7 t

THROUGHPUT (dependent on material)

Performance:

up to 110 t.sh/h

up to 100 t/h

OPTIONS

Armoured drum teeth, forward movement device (Hook, Trailer), towing unit (Hook), remote control, central lubrication, over-band magnet with swinging arm, magnetic head pulley etc.